• 供貨總量 : 不限
• 價格說明 : 議定
• 包裝說明 : 不限
• 物流說明 : 貨運及物流
• 交貨說明 : 按訂單

ppr管熔管的時候，發現成功率不高，主要為接管后發現會有點歪，個人比較主義，所以不滿意的全部剪掉重來，這樣導致會浪費很多接頭。在熔管的時候，先用PPR管剪刀切好ppr管。

When the PPR pipe was melted， it was found that the success rate was not high. The main reason was that it would be a little crooked after taking over. It was individualistic， so it was not satisfied to cut all the parts and start over again， which would lead to a lot of joint waste. When melting the pipe，PVC管材品牌， first cut the PPR pipe with PPR pipe scissors.

冷熱水管不要同槽

水路改造時，冷熱水管要不要同槽，而且兩者之間距離保持10cm以上。如果熱水管緊挨冷水管，會降低熱水管的保溫性，熱水很快就會變冷。這里還要提醒大家，水管開槽較深，要避免開開橫槽，橫槽會破壞墻體結構。

Hot and cold water pipes should not be in the same tank

In waterway rectruction， whether the cold and hot water pipes should be in the same groove， and the distance between them should be kept at least 10 cm. If the hot water pipe is close to the cold water pipe， the heat preservation of the hot water pipe will be reduced， and the hot water will soon become cold. Here also reminds everybody， the water pipe groove is deep， must avoid to open the transverse groove， the transverse groove will destroy the wall structure.

管道壁厚的增加直接帶來的性能的提升，比如：工作壓力增大，PVC管材生產，剛性增強，線性膨脹系數降低，PVC管材咨詢，耐溫性能提高等等。

The increase of pipe wall thickness directly improves the performance， such as the increase of working pressure，PVC管材， the increase of rigidity， the decrease of linear expansion coefficient， the improvement of temperature resistance and so on.

PVC管材咨詢-PVC管材-Gafloon卡弗龍(查看)由臺州艾菲力塑膠有限公司提供。臺州艾菲力塑膠有限公司實力不俗，信譽可靠，在浙江 臺州 的塑料管等行業積累了大批忠誠的客戶。艾菲力塑膠帶著精益求精的工作態度和不斷的完善創新理念和您攜手步入輝煌，共創美好未來！同時本公司還是從事PPR管，地暖管，PVC管的廠家，歡迎來電咨詢。